LENCO Edge Mounting Kit 12″X12″W/O Switch – 15116-101

Description

LENCO Edge Mnt Kit 12″X12″W/O Switch – 15116-101.

All the same features of the Edge Mount series with the addition of Electro-Polished blades. Electro-Polish adds a mirror finish and the ultimate corrosion protection. Actuator mounts at the trailing edge of these 12” (30.5 cm) blades giving them a 3” (7.6 cm) lower mounting height. Boat Lengths 14′ (4.3 m) to 30′ (9.1 m). Blades are constructed of Electro-Polished 12 gauge (2.7 mm) laser cut 304 stainless steel with a 1” (2.5 cm) turned up edges and a 5 degree taper on both sides to the trailing edge & 1/8” (3.2 mm) diameter hinge pin. Upper and lower high impact corrosion proof mounting brackets with mechanical cable gland seal.

• L” X W”: 12″ X 12″
• Boat Length: 17′ – 30′ (5.18m – 9.14m)
• Hinge Height: 2″ (5.1 cm)
• Min Transom Height: 11″ (27.9 cm)
• (2) 12-gauge stainless steel Electro-Polished blades
• (2) 15054-001 actuators with 6′ (1.8 m) leads and Deutsch connectors
• (2) 30133-103 actuator extension wiring harnesses – 20′ (6.1 m) length
• (2) 15085-001 upper mounting brackets with gland seal
• (2) 50014-001 lower mounting brackets
• Lenco owner’s/installation manual
• Stainless steel mounting hardware
• 12-volt