TIDES 1-1/4″ Water Pick-Up Hose Tee Kit with 3/8″ Branch – TK-1250-3/8-.218

Description

TIDES 1-1/4" Water Pick-Up Hose Tee Kit with 3/8" Branch – TK-1250-3/8-.218

Tides Marine water pick-up kit for tapping a 1-1/4″ flexible raw-water cooling hose and supplying a 3/8-inch water-injection line to a SureSeal shaft seal.

• Provides the components needed to tap a flexible engine raw-water hose
• Supplies cooling and lubrication water to the SureSeal lip seal and PTFE bearing
• Includes a brass hose tee with a 3/8-inch injection branch
• Includes approximately 8 feet of 3/8-inch silicone injection hose
• Includes clamps for the main cooling hose and injection-hose connections

Confirm the inside diameter of the engine cooling hose before ordering and install the tee on the pressure side of the raw-water system as directed by Tides Marine. Route the injection hose continuously upward where required and protect it from heat and abrasion.

Specifications

• Manufacturer: Tides Marine
• Main cooling-hose size: 1-1/4″
• Injection branch: 3/8″
• Branch bore: 0.218″
• Injection hose included: Approximately 8 ft of 3/8″ hose
• Fitting material: Brass
• Application: SureSeal water pick-up
• Part number: TK-1250-3/8-.218