SIERRA Mercury / Mariner Power Trim Hose, 61 Inch – 18-2110

Description

SIERRA Mercury / Mariner Power Trim Hose, 61 Inch – 18-2110

Sierra 18-2110 is the small-diameter power-trim hose used between the trim cylinder and control-valve side of selected Mercury and Mariner inline-outboard systems with an externally mounted trim pump. Its cataloged length is approximately 5 ft 1 in.

• Small-diameter hydraulic trim hose for Mercury/Mariner inline outboards.
• Cataloged length: 5 ft 1 in (61 in / 1.55 m).
• Used in external-pump trim-system plumbing between cylinder/control-valve components.
• Two hoses of this small-line type are used per engine on the cataloged system configuration.
• Verify the trim-pump location and original Mercury hose number before ordering.

For marine drive and engine service parts, fitment can vary by model, serial number, gear ratio, casting and prior service history. Compare the original OEM number and physical configuration before installation, and replace related seals, bearings, locking hardware or cable components when their condition requires it.

Specifications

• Manufacturer: Sierra
• Part Number: 18-2110
• Application: Trim-equipped Mercury/Mariner inline outboards with the trim pump external to the clamp/transom bracket; excludes designs with the pump mounted between the clamp brackets.
• Length: 1.55 m (61 in)
• System: Hydraulic power trim
• Application: Mercury/Mariner inline outboards with external trim pump
• Part Type: Small-diameter trim hose

Interchange / OEM References

• Mercury Marine: 32-45327, 32-88005, 32-97153A1