Description
LECTROTAB One-Touch Leveling LED Trim Tab Control – SLC-11.
Lectrotab is thrilled to announce a new control system designed with features requested by boat owners for a more user-friendly and enjoyable boating experience.
Key Features:
- One-Touch Control: Easily raise or lower trim tabs with a single button press.
- Automatic Tab Position Return: Tabs return to their previous position when the ignition is turned off and back on.
- Waterproof Design: Completely sealed and waterproof, ensuring durability and resistance to sunlight.
- LED Indicators: Microprocessor-based control with LED indicators for tab position, which adjust brightness based on ambient light.
- Simultaneous Operation: Move both tabs up or down simultaneously with one button.
- Easy Replacement: Directly replaces Oval LED (SETR-61) controls.
- Automatic Retraction and Calibration: Tabs retract and calibrate automatically when the key or accessory switch is turned off.
- Upgrade Compatibility: Simple upgrade from rocker switch style controls.
- No External Power Module Needed: Suitable for single or dual actuator per tab systems without the need for an external power module.
- Adjustable Programming: Features adjustable programming options on the back of the specification sheet.
- Versatile Voltage: Operates on both 12 and 24 volt DC systems.
| SLC PROGRAMMING | ||||||
| Program Mode Sequence | ||||||
| Setting | Enter | Change Setting | Exit and Save | Range | Default | Program Details |
| Timing | Port Bow Down | Press and hold Stbd. Bow Up/Down | Port Bow Up | 4 – 12 seconds | 8 sec. | 8 LED’s = 8 second actuator 4 LED’s = 4 second actuator |
| Swap LEDs | Starboard Bow Down | Stbd. Bow Up/Down | Port Bow Up | LEDs opposite or same side as button press | LEDs opposite | 1 LED each side = LEDs opposite button press / 8 LEDS each side = same side |
| Remember last tab setting | Port Bow Up | Stbd. Bow Up/Down | Port Bow Up | Standard retract / Remember last tab setting | Standard | 8 LEDs each side = Standard / 1 LED each side = Remember last tab setting |
| Disable Auto Tab Retract | All Up and All Down Simultaneously for 2 seconds or longer | Stbd. Bow Up/Down | Port Bow Up | Enable / Disable | Enable | 1 LED each side = Auto Tab Retract Enable / 8 LEDs each side = Auto Tab Retract Disable |
Enter, Adjust and Exit Program Mode:
- Before entering program mode, 12vdc or 24vdc must be applied to Oval main power
- Power to AUX terminal must be OFF (Aux is typically connected to ignition key switch or aux switch)
- Press and hold button noted in Programming chart under column “Enter” for more than 2 seconds while switching the Aux terminal switch to ON at the same time
- Release the “Enter” button and press “STBD BOW UP or DOWN” button to change the value
- Press and hold “PORT BOW UP” for more than 2 seconds to exit program mode
Reviews
There are no reviews yet.