VICTRON ENERGY Smart Battery Charger, 24V/25A, Triple-Bank, Bluetooth-Enabled, IP43-Rated – PSC242553095

Description

VICTRON ENERGY Smart Battery Charger, 24V/25A, Triple-Bank, Bluetooth-Enabled, IP43-Rated – PSC242553095

The Victron Energy Smart IP43 Charger 24/25 (1+1) & (3) model is a powerful, reliable, and versatile charging solution tailored for 24V battery systems. Designed to optimize performance and extend battery life, this charger is ideal for marine, off-grid, and other demanding energy setups. Equipped with Bluetooth technology, it allows users to monitor, control, and update settings effortlessly via the VictronConnect app.

Key Features

• Bluetooth Smart Technology: Integrated Bluetooth for seamless setup, monitoring, and firmware updates.
• Adaptive 6-Stage Charging Algorithm: Features bulk, absorption, recondition, float, storage, and refresh modes.
• Dual Options:
  • (1+1) Model: Two outputs for charging two battery banks (secondary limited to 4A).
  • (3) Model: Three full-current outputs for charging three independent battery banks.
• BatterySafe Mode: Prevents damage due to excessive gassing by controlling voltage increases.
• Storage Mode: Reduces float voltage for minimal battery maintenance and aging during inactivity.
• Li-ion Compatibility: Fully supports Li-ion (LiFePOâ‚„) batteries.
• Remote Control and Monitoring: Includes remote on/off capabilities and programmable relays for enhanced flexibility.
• VE.Direct Interface: Offers wired connectivity for diagnostics and data integration.

The Smart IP43 Charger 24/25 is engineered to deliver precise and efficient charging for a variety of battery types. Whether you’re maintaining deep-cycle batteries or topping up a starter battery, the adaptive six-stage algorithm ensures optimal performance tailored to your battery’s specific needs. The (1+1) configuration offers a primary output of up to 25A and a secondary output for topping up a starter battery, while the (3) model provides full-current outputs for up to three separate banks, making it versatile for diverse setups.

The advanced BatterySafe and Storage modes protect your batteries from damage caused by overcharging or long idle periods. BatterySafe ensures voltage levels are moderated during rapid charging, while Storage Mode reduces float voltage to prevent gassing and corrosion. Together, these features contribute to extending battery lifespan and reliability.

Designed with durability in mind, the Smart IP43 Charger features a robust aluminum enclosure rated for IP43 protection. Natural convection cooling eliminates the need for fans, reducing noise and increasing reliability. The charger is also Bluetooth-enabled, allowing you to access and configure settings remotely using the VictronConnect app. For professionals managing complex systems, the VE.Direct interface and remote on/off capabilities provide seamless integration with advanced setups.

Specifications:

Electrical

• Input Voltage Range: 85 – 250 VAC (full power from 100 VAC)
• DC Input Voltage: 90 – 375 VDC
• Frequency: 45-65 Hz
• Power Factor: 1
• Back Current Drain: <1 mA
• No Load Power Consumption: 1 W
• Maximum Efficiency: 96%
• Charge Voltage:
  • Normal: 28.8 V / 27.6 V / 26.4 V
  • High: 29.4 V / 27.6 V / 26.4 V
  • Li-ion: 28.4 V / N/A / 27.0 V
• Charge Algorithm: 6-stage adaptive (3-stage for Li-ion)

Outputs

• Number of Outputs:
  • (1+1): 2 outputs (secondary limited to 4A)
  • (3): 3 full-current outputs
• Charge Current:
  • House Battery: 25A max
  • Starter Battery: 4A max (1+1 models only)
• Low Current Mode: 12.5A

Physical

• Material & Color: Aluminum (blue RAL 5012)
• Dimensions: 180 x 249 x 116 mm (7.1 x 9.8 x 4.6 inches)
• Weight: 2.7 kg (6 lbs)
• Enclosure Protection:
  • Electronics: IP43
  • Connection Area: IP22

Environmental

• Operating Temperature: -20 to 60°C (0 to 140°F)
• Humidity: Max 95% (non-condensing)

Connectivity

• Remote On/Off: 2-pole terminal
• Bluetooth: Power: -4 dBm; Frequency: 2402 – 2480 MHz
• VE.Direct Interface: For GX device integration and diagnostics

Standards

• Safety: EN 60335-1, EN 60335-2-29
• Emissions: EN 55014-1, EN 61000-6-3
• Immunity: EN 55014-2, EN 61000-6-1
• Vibration: IEC68-2-6: 10-150Hz/1.0G