Description
INTERLUX Toplac Plus Premium Yacht Gloss Enamel, Snow White – YLK000-QT
Interlux Toplac Plus is a premium one-part yacht gloss enamel for properly prepared substrates above the waterline. This snow white finish is designed for a professional-looking high-gloss result with excellent flow, durable colour retention and UV protection.
Toplac Plus is formulated for easier roller application without tipping, making it a strong choice for topsides, transoms, exterior cabin sides and trim where a smooth one-part finish is desired. It should be applied over a suitable primer or undercoat such as Pre-Kote Plus or Epoxy Primekote, depending on the substrate and project requirements.
- Premium high-gloss one-part yacht enamel for above-waterline surfaces
- Improved flow and roller application without the need for tipping
- Contains UV filters for longer-lasting gloss and colour retention
- Suitable for brush, roller or spray application when used with the correct solvent system
- Part of the Interlux one-part topside system with Pre-Kote Plus primer/undercoat
Specifications
- Manufacturer: Interlux
- Product line: Toplac Plus
- Part number: YLK000-QT
- SKU: INT-YLK000-QT
- Colour: Snow White
- Colour code: YLK000
- Size: 1 US quart
- Product type: Premium one-part silicone alkyd yacht gloss enamel
- Finish: High gloss
- Use area: Above the waterline only
- Specific gravity: 1.1
- Volume solids: 51%
- VOC as supplied: 404 g/L
- Typical shelf life: 2 years
- Recommended coats: 2-3 coats; one coat may be sufficient for touch-up or repair
- Theoretical coverage: 652 ft²/US gal per coat
- Practical coverage: 587 ft²/US gal per coat
- Recommended dry film thickness: 1-1.5 mils per coat
- Recommended wet film thickness: 2-3 mils per coat
- Application methods: Brush, roller or spray; roller application does not require tipping
- Drying at 77°F / 25°C: Touch dry in approximately 2 hours; overcoat after 8 hours and within 2 days
- Primer / undercoat: Interlux Pre-Kote Plus or Epoxy Primekote, selected according to substrate and system requirements
- Thinner / reducer: Reducing Solvent Brush 2333N for brush/roller; Special Thinner 216 for spray
- Cleaner: Brushing Liquid 333, Reducing Solvent Brush 2333N, or Special Thinner 216 depending on application method
- Compatible complementary products: Pre-Kote Plus, Epoxy Primekote, Reducing Solvent Brush 2333N, Brushing Liquid 333, Special Thinner 216, Intergrip Polymeric No-Skid for custom non-skid areas
- Surface preparation: Previously painted sound surfaces: wash, rinse, dry, sand with 280-320 grit, remove residue and wipe with Brushing Liquid 333; poor coatings should be removed and the substrate primed
- Important note: Not suitable for permanently immersed surfaces. Do not use below 41°F / 5°C, and avoid late-evening application where condensation may reduce gloss
