Description
Made from soft, durable foam, 3M Hookit Soft Interface Pads help to increase conformability, allowing the technician to follow contours and get in closer to most edges. This product reduces vibration on dual-action random orbital sanders, and is designed for use with all 3 inch (7.62 cm) 3M™ Hookit™ Disc Pads.
The 3M Hookit Soft Interface Pad 05777 is constructed from a soft durable foam which allows the technician to follow contours and get closer to edges while minimizing burn through. This product reduces vibration on dual action random orbital sanders using the 3M Hookit Disc Pad. It is for use with all 3M Hookit Disc Pads.
Details
- Soft foam interface conforms to contours leaving a finer finish
- Constructed from soft durable foam, allowing the technician to minimize burn through
- For use with all 3M™ Hookit™ Disc Pads
- May be used with both dust free and non-dust free discs
- May be used with both Dust Free and non-Dust Free discs.
- Designed for 3M™ Hookit™ Abrasives
Suggested Applications
- For use with all 3M™ Hookit™ Disc Pads
3M Perfect-It Professional Gelcoat Finishing (for heavily UV beaten gelcoat)
For use on gelcoat that is heavily UV beaten. For best results, follow these steps. | Step 1: Cleaning Clean the gelcoat surface to be repaired with 3M Perfect-It Boat Wash. | ' |
 | Step 2: Sanding Sand gelcoat surface with 800 grit abrasive on a dual-action sander at 900 - 1100 Max RPM. When sanding, abrade the surface with a 50% overlap on each pass with a dual action sander. Remember to use a soft interface pad when sanding with the 800 grit abrasive. | Not currently available |
 | Step3: Sand Scratch Refinement Refine the 800 grit sand scratch with a 1500 grit sandpaper with a dual action sander running the sander at a speed of 900 - 1100 RPM Max. When sanding, use a 50% overlap with each pass of the sander. Remember to use a soft interface pad with the 1500 grit abrasive when sanding. | '' |
 | Step4: Buffing Buff the 1500 grit sand scratch with 3M Perfect-It Gelcoat Heavy Cutting Compound and a white wool buffing pad. Set the buffer speed between 1200 - 2000 Max. RPM. | ' |
 | Step 5: Polishing (Optional) Polish gelcoat with 3M Finesse-It II Glaze and with a yellow wool buffing pad. Set the buffer speed to between 1200 - 2000 RPM Max. | ' |
 | Step 6: Protection Apply 3M Perfect-It Boat Wax to protect the surface. When applying wax, apply in a 2' x 2' area and wipe area clean before wax dries. Do not allow the wax to dry or haze on the gelcoat. Alternatively , consider using 3M Perfect-It Gelcoat Light Cutting Polish + Wax with a yellow wool buffing pad set at 1200 - 2000 RPM. | ' |
