Description
VICTRON ENERGY Smart BatteryProtect 12/24V 220A Bluetooth Low-Voltage Disconnect – BPR122022000
The Victron Energy Smart BatteryProtect 12/24V 220A is a Bluetooth-enabled low-voltage disconnect designed to protect batteries from excessive discharge. It automatically disconnects non-essential DC loads before the battery is drained too far or before there is insufficient power left to start an engine, helping extend battery life and improve system reliability.
This Smart BatteryProtect model automatically detects 12V or 24V system voltage and can be programmed wirelessly using the VictronConnect app. Custom engage and disengage voltage levels can be set by Bluetooth, or one of nine predefined programs can be selected using the programming pin. The remote on/off input can also be used as a system switch, making it useful for boats, RVs, cabins, service vehicles, trailers, vans, and off-grid DC systems.
- 220A Smart BatteryProtect for 12V and 24V DC systems
- Disconnects non-essential loads before excessive battery discharge occurs
- Bluetooth programming and monitoring through the VictronConnect app
- Automatic 12/24V system voltage detection with programmable disconnect and reconnect levels
- Remote on/off input can be used as a system switch or controlled by a compatible lithium BMS
The Smart BatteryProtect is a uni-directional device and is designed for current flow in one direction only, from the IN terminal to the OUT terminal. It can be used either with loads or with a charger, but not with load and charge current flowing through the same unit at the same time. It is also not intended to be connected directly to the DC input of an inverter or inverter/charger due to high inrush currents.
Specifications
- Brand: Victron Energy
- Part Number: BPR122022000
- UPC/GTIN: 8719076041269
- Product Type: Bluetooth low-voltage battery disconnect / battery protection device
- Model: Smart BatteryProtect 12/24V 220A
- System Voltage: 12V / 24V auto ranging
- Maximum Continuous Load Current: 220A
- Peak Current: 600A
- Operating Voltage Range: 6 – 35V DC
- Over-Voltage Disconnect: 16.3V for 12V systems / 32.6V for 24V systems
- Programming: Bluetooth through VictronConnect or programming pin
- Predefined Voltage Programs: 9
- Communication: Bluetooth
- Lithium Battery Support: Yes, with compatible external BMS control
- Remote On/Off: Yes
- Alarm Output: 50 mA, short-circuit proof
- Current Consumption With Bluetooth On: 1.4 mA on / 0.9 mA after low-voltage shutdown
- Current Consumption With Bluetooth Off: 1.2 mA on / 0.7 mA after low-voltage shutdown
- Connection: M8 terminals
- Operating Temperature: -40°C to +40°C at full load; 60% nominal load at 50°C
- Approximate Dimensions: 62 mm H x 123 mm W x 120 mm D
- Approximate Weight: 0.8 kg / 1.8 lb
Reviews
There are no reviews yet.