HARKEN 40mm Single/Wide Sheave Thru Block – 1205

Description

HARKEN 40mm Single/Wide Sheave Thru Block – 1205

HARKEN 40mm Single/Wide Sheave Thru Block – 1205 is Harken sailing hardware engineered for reliable marine use in the application indicated by its model and configuration.

• Harken Protexit™ blocks prevent the sideplate wear normally caused by aggressive, high-angle halyard loading.
• All-aluminum, wear-resistant housing guides the line smoothly in and out from any angle.
• Built with higher working loads than any small-boat exit block Harken has produced.
• Aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls , preventing deformation under extreme conditions.
• Designed to reduce halyard wear while delivering reliable performance for frequent hoists and douses.

Harken 40mm Single/Wide Sheave Thru Blk – 1205 Harken Protexit™ blocks prevent the sideplate wear normally caused by aggressive, high-angle halyard loading All-aluminum, wear-resistant housing guides the line smoothly in and out from any angle Built with higher working loads than any small-boat exit block Harken has produced Aluminum sheaves rotate on sleeve bearings with Delrin® sideload balls , preventing deformation under extreme conditions Designed to reduce halyard wear while delivering reliable performance fo

For best results, confirm the Harken part number and system compatibility before installation, and operate the hardware within Harken’s published line-size and load limits.

Specifications

• Manufacturer: Harken
• Part Number: 1205
• Nominal Size: 40 mm
• Configuration: Single