DOMETIC SEASTAR Standard Bulkhead Outboard Hose Kit 2-Piece x 24 ft – HO8124

Description

DOMETIC SEASTAR Standard Bulkhead Outboard Hose Kit 2-Piece x 24 ft – HO8124

The Dometic SeaStar HO8124 Standard Bulkhead Outboard Hose Kit is intended for hydraulic steering installations where the steering hoses pass through a splashwell or bulkhead and need a clean, protected exit point.

Each hose assembly uses an integral bulkhead fitting so the hose can be routed neatly through the boat structure instead of leaving excess loose hose exposed in the splashwell. This helps reduce chafing, kinking, and clutter around the outboard steering cylinder.

SeaStar steering hoses are engineered for low volumetric expansion and are intended for SeaStar hydraulic steering systems where correct hose construction is critical to steering feel and system reliability.

• Bulkhead routing: Integral bulkhead fittings provide a tidy, secure pass-through for splashwell installations.
• Marine hydraulic construction: Designed for SeaStar steering fluid and hydraulic steering pressures.
• Protected hose path: Helps reduce loose hose, abrasion, and sharp bends near the engine well.
• System fit: Suitable for many SeaStar hydraulic steering systems; not for BayStar, Capilano, or 3-line inboard systems.
• Installation planning: Measure along the intended hose path and select a length that avoids tight bends or strain at the fittings.

Specifications

• Manufacturer: Dometic SeaStar
• Manufacturer Part Number: HO8124
• Product Type: Standard bulkhead outboard hydraulic steering hose kit
• Hose Length: 24 ft (7.32 m)
• Hose Count: 2 hoses
• Port / Connection Type: 3/8 in compression fitting
• Hose Type: Standard hydraulic steering hose
• Application: Outboard SeaStar hydraulic steering bulkhead/splashwell routing