NEWMAR Digital Meter Dc Multi – DCE

Description

NEWMAR Digital Meter Dc Multi – DCE.

Displays volts, amps, energy used and remaining for 12 or 24 volt systems up to 500 amps and up to 3,000 amp-hour capacity. Makes DC energy management a breeze. Monitor voltage on up to three separate banks. House bank (or battery bank of choice) may be also be programmed for the following functions:
1) Monitor charge/discharge amperage.
2) Total energy monitor can be set for amp-hours or percent-of-charge.
3) High/low voltage alarm, plus alarm set-point for low amp-hours remaining. 500 amp shunt included.

All read-out modes and alarm programming of multiple functions are controlled via touch-pads on the instrument face. LCD displays are easily read in bright sunlight and feature five level adjustable back-lighting for conservation of night vision. The meter/touch-pad and surrounding bezel are fully waterproof are suitable for installation in exposed above deck areas (provided there is no water ingress to the rear of the mounting surface).

• NMEA 0183 compatible
• All models are designed for through-bulkhead mounting
• 2-1/4″ diameter cutout