MARTYR Aluminum Max Prop Anode 70 MM 1-1/4 – 1-3/8 – CMMP70RA

Description

MARTYR Aluminum Max prop 70 MM 1-1/4 – 1-3/8 – CMMP70RA is an aluminum sacrificial marine anode for prop hub anodes. It is intended to corrode sacrificially so the protected underwater metal component is preserved.

Water application: Salt Water and Brackish Water. Use the published fitment measurements below to compare against the anode being replaced. Confirm fitment with the full MARTYR manufacturer part number CMMP70RA; the store SKU may omit or alter MARTYR’s leading CM prefix.

Features

• Designed for corrosion protection at the propeller, propeller nut, hub, or related rotating assembly.
• Confirm ID/OD, height, thread, and propeller/shaft application before installation.
• Designed to protect the specified propeller, propeller nut, hub, or thruster assembly from galvanic corrosion.
• Direct replacement anodes for Max Prop engines.
• Aluminum alloy application: Salt Water and Brackish Water.
• Fitment Measurements: Nominal Max Prop size 70 mm (2.76 in); height 1.75 in (4.445 cm); outside diameter 2.63 in (6.68 cm); screw-hole centres 2.00 in (5.08 cm); fastener M5 x 0.8 x 20 mm; for 1-1/4 to 1-3/8 in shaft applications

Specifications

• Brand: MARTYR Anodes
• Manufacturer Part Number: CMMP70RA
• Store SKU: CMT-MP70RA
• Anode Type: Prop Hub Anodes
• Material: Aluminum
• Recommended Water Type: Salt Water and Brackish Water
• Alloy / Standard: MIL-DTL-24779C (SH)
• Application / Fitment: Aluminum Max prop 70 MM 1-1/4 – 1-3/8