AWLGRIP Repair Basecoat Foundation – E3001-QT

Description

AWLGRIP Repair Basecoat Foundation – E3001-QT.

E3001 is a primer used when repairing any Awlcraft SE coating. It is applied after repairing and sanding the defect in your original SE coating, before the new Awlcraft SE colored base is applied, to enable a smooth, invisible repair.

Note – repair of your Awlgrip finish requires the services of a skilled applicator.
Should you need to repair an Awlcraft SE coating system, from the smallest scratch to a large scale repair, the Awlcraft SE Repair Manual will take you step-by-step through the preparation, application, and finishing of the process – greatly aiding in a successful repair. (See link in Manufacturer’s Resources)

To make the repair, the following Awlgrip repair products are required, as well as the original colored SE Basecoat and the Awlcraft 2000 or HDT Clearcoat you used.
Awlgrip Repair – Basecoat Foundation Coat (Repair Primer) E3001
Awlgrip Repair – Basecoat Blender T0190 (used with your colored SE Basecoat)
Awlgrip Repair – Topcoat Blending Solvent T0195 (used with your application’s Clearcoat)
You will also need Awlgrip T0170 solvent and a T000X reducer. Note – repairs of Pearlescent systems additionally requires SE Pearl Mid-Coat. (See SE Repair Manual for details.)