The Racor Turbine Series fuel filter/water separators protect the precision components of your engine from dirt, rust, algae, asphaltines, varnishes and especially water, which is prevalent in engine fuels. They remove contaminants from fuel using the legendary three stage process described below. The Racor MAX assembly allows the isolation of one filter at a time for servicing while the engine is running. The handle pointer always indicates which unit is on-line. To take one filter off line for servicing while engine is running, select the filter to stay on-line, then begin servicing the other unit.
Models 75900MAXM and 751000MAXM are American Bureau of Shipping (ABS) and Bureau Veritas (BV) Marine Type Approved.
How It Works
Stage 1 – Separation
Using the fuel flow, the turbine separates large solids and ‘free’ water through enhanced centrifugal force.
Stage 2 – Coalescing
Smaller water droplets and solids coalesce on the conical baffle and fall to the collection bowl.
Stage 3 – Filtration
Engines will benefit from near 100% water separation and fuel filtration with Racor’s proprietary Aquabloc® water repelling media. The replaceable filters are available in 2, 10 and 30 micron ratings.
- Flow rate 180 GPH or 360 GPH when both filters selected.
- Port size: 7/8”-14 (SAE J514)
- Max pressure: 25 PSI (1.7 bar)
- Ambient temperature range: -40°F to +250°F (-40°C to +121°C)
- Technical Sheet